+971 2 557 7389 info@petroknowledge.com
Petroknowledge

An Intensive 5 Day Training Course

Safety Audit & Site Inspection

Print this Course

Code Date Venue Fee($)
HS115 10 - 14 Nov 2019 Dubai - UAE 4,950

*All fees are exclusive of VAT


Why Choose this Training Course?

“What you do not measure you cannot improve on”; every system however good on paper needs to be checked if it actually works in practice. How much more important is this need when what is at stake is not only money but human lives?

This highly-interactive PetroKnowledge training course will cover the essentials of Audits. Delegates will learn that an Audit is about examining the systems within a company and verifying firstly that the systems actually do exist and secondly that these systems are within the legislative requirements. Within this essential PetroKnowledge training course, the focus will also be on methods of identifying gaps that should be filled and or improved upon.

In this Safety Audit and Site Inspection training course, participants will learn about document searches, interviews and actual Site Inspections.  Audit and Inspection findings are facts and not opinions and this is emphasised throughout the course.

In this training course, participants will learn to:


Training Objectives

What are the Goals?

By the end of this training course, participants will:

  • Understand the legal background
  • Appreciate all Audit activities
  • Gain knowledge about the elements of a Safety Management system
  • Successfully undertake Site Inspections
  • Assess the Safety Culture of the organization
  • Evaluate the Emergency Plans of the Organisation

Target Audience

Who is this Training Course for?

This PetroKnowledge training course is suitable to a wide range of professionals but will greatly benefit:

  • All Supervisors and Line Management who have assigned responsibilities within the organisation’s Safety Management System (SMS)
  • HSE personnel
  • Operations personnel
  • Maintenance personnel
  • Staff involved in Contractor work

Training Methods

How will this Training Course be Presented?

Participants will learn by active participation during the course through the use of exercises, case studies and open discussion forums. Videos shown will encourage further discussions. The training course will be run using PowerPoint slide, copies of which will be distributed both in hard and soft formats.

Daily Agenda

Day One: Introduction to Audits, Legislation & Contractors

Competency Description: It is a necessary to understand legal and best practice before undertaking Audits and Inspections

Key behaviours

  • What is the latest best practice for On Shore High Hazard Plants?
  • What are the requirements mobile construction sites?
  • Do Risk Assessments need a new approach?

Topics to be covered

  • Introduction to safety audits and inspections
  • The Legal Aspects
  • Good Practice for the Oil and Gas Industry
    • The New Seveso III Directive,
    • PSM 1910.119
  • Directive 92/57/EEC - temporary or mobile construction sites
  • Contractor Selection & Induction
  • Risk Management & Risk Assessments
  • Evaluating Risk Assessments

Day Two: Elements of a Safety Management System – Audits

Competency Description: The Auditor must be aware of the types of Safety Management Systems

Key behaviours

  • Appreciate the differences of SMS
  • Which Elements of a Safety Management System should be Audited
  • Which KPIs are relevant
  • The activities undertaken by the Auditor

Topics to be covered

  • Types of Safety Management Systems
    • Mechanical Model
    • Socio Technical Model
  • Elements of Safety – Management Systems
  • SMS Policy – Elements of SMS policy statements
  • Proactive and reactive monitoring of performance
  • ANSI/API 754 Process Safety Indicators for the Refining and Petrochemical Industries
  • The Auditors’ qualifications
  • Audits
    • Pre Audit Activities
    • On Site Activities
    • Post Audit Activities
    • Classification of Findings

Day Three: Inspections

Competency Description: The physical Inspection of the Plant is part of the Audit.

Key behaviours

  • Energetic, inquisitive and persistency in inspections
  • Knowledge of the legal aspects
  • Communication skills
  • Excellent record keeping

Topics to be covered

  • Observation Techniques
  • Specific audit / inspection systems - physical inspection of the site
  • Confined Space Entry
  • Work at height
    • Scaffolding
    • Ladders
    • PPE
  • Fire Assessment
  • Chemicals
  • Work Permit Systems

Day Four: Safety Culture

Competency Description: This is the Soft area of Safety and is strongly linked to Behavioural Safety. One cannot exist without the other.

Key behaviours

  • Understanding motivation, attitudes and perceptions
  • What is the Id, Ego and Superego?
  • The results of consequences

Topics to be covered

  • Safety Culture and Behavioural Safety
  • Motivation - Taylor, Herzberg, Vroom, Gueller, Maslow
  • ABC Analysis
  • What drives behaviour
  • Natural penalties and consequences
  • Auditing the Safety Culture
  • Improving the Culture

Day Five: Emergencies

Competency Description: However unlikely an emergency is always possible. Every company must have in place a ready response for the most likely emergencies that it may face.

Key behaviours

  • Which Internal emergency Plans should be in place?
  • How are these plans put into effect?
  • Is there a need for an External Emergency Plan?
  • Completing the Audit

Topics to be covered

  • Internal Emergency Plans
  • External Emergency Plans
  • Auditing emergency plans
  • Audit Reports
  • Course Review
  • Evaluation

Related Courses

Related Articles

Read more about Safety Audit & Site Inspection below:


Register Quick Enquiry Request an In-House Proposal

DMCA.com Protection Status

Home » Courses » Health, Safety, Security & Environment » Safety Audit & Site Inspection
PetroKnowledge Training


Safety Audit & Site Inspection


Code Date Venue Fees
HS115 10 - 14 Nov 2019 Dubai - UAE $4,950



Why Choose this Training Course?

“What you do not measure you cannot improve on”; every system however good on paper needs to be checked if it actually works in practice. How much more important is this need when what is at stake is not only money but human lives?

This highly-interactive PetroKnowledge training course will cover the essentials of Audits. Delegates will learn that an Audit is about examining the systems within a company and verifying firstly that the systems actually do exist and secondly that these systems are within the legislative requirements. Within this essential PetroKnowledge training course, the focus will also be on methods of identifying gaps that should be filled and or improved upon.

In this Safety Audit and Site Inspection training course, participants will learn about document searches, interviews and actual Site Inspections.  Audit and Inspection findings are facts and not opinions and this is emphasised throughout the course.

In this training course, participants will learn to:


Training Objectives

What are the Goals?

By the end of this training course, participants will:

Target Audience

Who is this Training Course for?

This PetroKnowledge training course is suitable to a wide range of professionals but will greatly benefit:

Training Methods

How will this Training Course be Presented?

Participants will learn by active participation during the course through the use of exercises, case studies and open discussion forums. Videos shown will encourage further discussions. The training course will be run using PowerPoint slide, copies of which will be distributed both in hard and soft formats.

Daily Agenda

Day One: Introduction to Audits, Legislation & Contractors

Competency Description: It is a necessary to understand legal and best practice before undertaking Audits and Inspections

Key behaviours

Topics to be covered

Day Two: Elements of a Safety Management System – Audits

Competency Description: The Auditor must be aware of the types of Safety Management Systems

Key behaviours

Topics to be covered

Day Three: Inspections

Competency Description: The physical Inspection of the Plant is part of the Audit.

Key behaviours

Topics to be covered

Day Four: Safety Culture

Competency Description: This is the Soft area of Safety and is strongly linked to Behavioural Safety. One cannot exist without the other.

Key behaviours

Topics to be covered

Day Five: Emergencies

Competency Description: However unlikely an emergency is always possible. Every company must have in place a ready response for the most likely emergencies that it may face.

Key behaviours

Topics to be covered

Print Page

© 2018. Material published by Petroknowledge shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.


Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2018. Material published by Petroknowledge shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.


Sending your message. Please wait...

Download PDF Click here to download PDF file Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download The Complete PetroKnowledge Training Schedules Here