An Intensive 5-Day Online Training Course
Electrical Engineering, Compliance,
Standards and System Fundamentals
Scheduled Dates
| 25 - 29 Dec 2023 | Online | $3,950 |
Why Choose this Training Course?
Why Choose This Training Course?
Electrical Engineering is key to everything in the 21st century. It powers everything from large industrial processes, all the way through to a simple cell phone charger. In order for these modern processes to work correctly, these processes require competent personnel to build, maintain, repair, replace and fault-find on a range of basic and complex systems.
The Electrical Engineering, Compliance, standards and system fundamentals online training course has been developed to allow a range of personnel who wish to learn new skills within electrical engineering and for existing personnel to develop new skills. The online course has been developed to allow personnel to develop a range of skills from basic power distribution, through to fault-finding on an Electric motor and PLC systems and to understand the associated regional and international standards for these systems.
This Electrical Engineering, Compliance, Standards and System Fundamentals online training course will highlight:
- The requirements to comply with legislation, Health & safety requirements, the Electricity at work regulations and Integrated safe systems of work
- Develop skills which are relevant to modern electrical engineering practices
- Minimum standards and best practice requirements
- Basic principles of Ohm’s law
- Electrical distribution techniques and practices
- Circuit protection techniques and selection of circuit protection
- Applications of motor circuits and MCC panels
- Fault-finding techniques
What are the Goals?
What are the Goals?
By the end of this Electrical Engineering, Compliance, Standards and System Fundamentals online training course, participants will be able to:
- Discuss the basic principles of ohm’s law and a variety of electrical calculations
- Elaborate on the dangers of Electricity
- Demonstrate methods of basic and fault protection methods
- Identify permit systems, integrated safe systems of work and safe isolation procedures
- Identify a variety of power supplies
- Use a variety of electrical test equipment
- Identify Electrical Earthing systems
- Select and apply a variety of circuit protection systems and devices
- Elaborate on electrical connections and switching devices
- Discuss applications of several different types of Electrical Motors
- Develop skills to enable the use of Electrical drawings and diagrams
Who is this Training Course for?
Who is this Training Course for?
This Electrical Engineering, Compliance, Standards and System Fundamentals online training course is suitable to a wide range of professionals but will greatly benefit:
- Electrical and Instrument Technicians.
- Electrical and Instrument Engineers.
- Personnel whose work involves construction of equipment and systems
- Supervisors
- Design Engineers (for understanding of Installation and Maintenance techniques)
- Mechanical Maintenance Technicians
- Mechanical Maintenance Engineers
- Staff who work in a limited capacity with Electrical systems
- Non electrical personnel
How will this Training Course be Presented?
This PetroKnowledge online training course will utilize a variety of proven online learning techniques to ensure maximum understanding, comprehension, retention of the information presented. The training course is conducted online via an Advanced Virtual Learning Platform in the comfort of your choice location
Daily Agenda
Day One: Introduction, Health and Safety and Electronics
- Pre-course Assessment
- Introduction
- Principles of Health and Safety
- Electricity at work regulations
- Personal protective equipment
- Basic principles of Ohms law
- Series and parallel circuits
- Hazards of electricity
- Electric shock
Day Two: Circuit Protection, Power Transmission, Power Supplies, Power Distribution and Test Equipment
- Recap on day 1
- Safe isolation
- IP ratings
- Circuit protection concepts
- Circuit protection devices
- Measurement devices
- Multi-meters
- Voltage indicators
- Oscilloscopes
- Current measurement
- Power distribution and transmission
Day Three: Earthing Systems, Circuit Protection, Electrical Connections, Inspection and Testing
- Recap on day 2
- Standards (IEC 60364)
- Earthing applications
- TNCS Earthing systems
- TNS Earthing systems
- TT Earthing systems
- IT Earthing systems
- Fuses, circuit breakers and additional circuit protection
- Electrical connections
- Electrical Inspection techniques
- Testing – Continuity of CPC’s
- Testing – Ring-final continuity
- Testing – Insulation Resistance
Day Four: Inspection & Testing and Motor Applications
- Recap on day 3
- Testing – Polarity
- Testing – Earth Electrode Testing
- Testing – Earth-loop impedance
- Testing – RCD Testing
- 6 steps to fault finding
- Preventative maintenance
- Reactive Maintenance
- Introduction to Motors
- Types of Motor (A.C. 3-Phase)
- Types of Motor (A.C. Single-Phase)
- Types of Motor (D.C.)
- Methods of starting Motors
- Schematic diagram development and interpretation
Day Five: Motors, Starting Techniques and Advanced Motor Logic
- Recap on day 4
- Types of Motor (D.C.)
- Methods of starting Motors
- Schematic diagram development and interpretation
- PLC’s and Ladder logic
- End of course Assessment
Certificate
- On successful completion of this online training course, a PetroKnowledge E-Certificate will be awarded to the delegates
