An Intensive 5-Day Online Training Course
Process Safety Management - Level 1
Improving Safety Performance
Scheduled Dates
| 04 - 08 Dec 2023 | Online | $3,950 |
Why Choose this Training Course?
If you think Safety is expensive then try an accident. Process incidents create such horrific losses in terms of human life (something that is irreplaceable) and damage to the environment and plant equipment. The disasters at Feyzin in France, Flixborough in England, Seveso in Italy and at Phillips Petroleum in Pasadena, Texas brought to the forefront the need to control industrial activities within a stricter regime. In Europe the resultant controls are through the Seveso III Directive whilst in the USA this is through OSHA’s Process Safety Management CFR 1910.119. The objective of such legislation is the prevention of major-accidents, protection of life, property and the environment.
Process Safety Management requires a high level of expertise for control of hazards. The key provision of Process Safety Management is a careful review of what could go wrong and what safeguards must be implemented to prevent, releases of hazardous chemicals, fires and explosions. This PetroKnowledge Process Safety Management Level-1 online training course is the ultimate in as it deals with, not only the systems, but how these systems should be utilised and the hazard protections process necessary.
This Process Safety Management - Level 1 online training course will highlight:
- Process Safety Management standards
- Management of Change
- Start Up and Shutdown
- Furnace operations
- Types of fire, explosions
What are the Goals?
By the end of this online training course, participants will:
- Appreciate the expertise required to implement Process Safety
- Understand HAZOP Studies
- Recognise how Management of Change can fail
- Understand hazards of confined spaces
- Evaluate correct procedures for start-up and shutdown
- Comprehend fire and explosion types
Who is this Training Course for?
Within the organization all personnel are involved in keeping safety as a prime responsibility. The systems will always be present but the effectiveness of the systems depend upon the personnel who work the actual systems.
This Process Safety Management Level-1 online training course is suitable to a wide range of professionals but will greatly benefit:
- All supervisors and line management who have assigned responsibilities within the Process Safety Management System
- Team Leaders and Managers
- Operations Personnel
- Maintenance Personnel
- HSE personnel
How will this Training Course be Presented?
This online training course will utilize a variety of proven online learning techniques to ensure maximum understanding, comprehension, retention of the information presented. The training course is conducted Online via an Advanced Virtual Learning Platform in the comfort of any location of your choice
Organisational Impact
The organisation that sends personnel to this online training course will benefit as the following:
- Be able to improve their present systems of work
- Apply new knowledge to improve safety performance
- Reduce the likelihood of incidents
- Have the capacity to increase profitability
- Be able to analyse Management of Change
Personal Impact
Responsibility brings with it accountability and everyone is accountable for actions taken and any failure to take action. Participants will be able to:
- Explain the foundations of process safety
- Describe the systems to prevent loss of containment
- Analyse common risks and controls
- Understand Furnace operations
- Appreciate Start Up and Shutdown Hazards
- Summarise safe entry procedures in confined spaces
- Create Emergency response strategies
Daily Agenda
Day One: Introducing Process Safety Management
- Introduction
- The difference between Process Safety and Personal Safety
- Learning from Incidents
- Process Safety Management standards (Seveso III and OSHA 1910.119)
- Permit to Work System
- Safe shift handover
Day Two: Risk Management and Management of Change
- Risk Management
- HAZOP Studies
- Inherent Safer Design
- Management of Change
Day Three: Combustion and Confined Space Entry
- Furnace operations
- Firing conditions
- Confined Space Entry
- Cleaning
- Isolating
- Atmospheric Testing
Day Four: Start Up, Shutdown, Hydrocarbon storage & Types of Fire & Explosions
- Start Up & Shutdown
- Storage Depots – Bund Areas
- Types of Storage – Tanks and Pressure Vessels
- Safety Instrumented Systems
- Types of Fire & Explosions – VCE, UVCE, BLEVE, Boil Over
Day Five: Fire and Emergency Response
- Passive and Active Fire Protection
- Emergency Response
- Review of the Week
- Evaluation & Post Training Course Assessment
Certificate
- On successful completion of this online training course, a PetroKnowledge E-Certificate will be awarded to the delegates
