Process Measurement, Instrumentation & Process Control

An Intensive 5-day Training Course

Process Measurement,
Instrumentation & Process Control

Principles & Best Practices

Process Measurement, Instrumentation & Process Control

Scheduled Dates

Classroom

15 - 19 Jul 2024 Dubai - UAE $5,950 RESERVE A SEAT
18 - 22 Nov 2024 Dubai - UAE $5,950 RESERVE A SEAT

Online

18 - 22 Nov 2024 Online $3,950 RESERVE A SEAT

Are the scheduled dates matching with your needs?

We provide a wider range of training options. Tailored and customized, we can deliver your organization’s training needs anytime, anywhere.

In-House Solutions ›

Why Choose this Training Course?

In an industrial situation where it is required to measure and control some aspect of a process, it is often the application of the knowledge and the ingenuity of the engineer or technician which is relied upon to solve the measurement and control problem. Therefore a fundamental understanding of the principle of operation of a range of sensors/transducers and instrumentation techniques applicable in an industrial situation combined with an understanding and knowledge of process control techniques and tuning methods equips the engineer or technician with the necessary skills and makes them invaluable in their workplace.

Delegates on this PetroKnowledge training course will investigate the operating principles and concepts of instrumentation and measurement systems and will acquire the knowledge relating to the characteristics and properties of the variables being measured. Moreover, the delegate will gain an understanding of the Process control systems and methods used in a modern industrial system.

This is a hands-on, practical PetroKnowledge training course and where applicable, theoretical studies will be supplemented with practical activities where the delegate will have the opportunity to design, develop, build, test and evaluate their own instrumentation systems within the course room.

This PetroKnowledge training course will highlight:

  • Introduction to the principles and fundamentals of Process Measurement and Instrumentation systems and Process variables. Symbols and units used and sample calculations
  • Principles of operation of Sensors and Transducers used for:
    • Temperature Measurement
    • Strain measurement
    • Pressure measurement
    • Flow measurement
    • Level measurement
  • Ultrasonic techniques for non-invasive process measurement
  • Principles of Process Control and study of the main Control strategies used, leading to an explanation of the 3-term PID controller
  • Explanation of a method used to ‘tune’ a 3-term PID controller
  • Practical activities to design, build, calibrate and signal condition a typical sensor application

What are the Goals?

The main objectives of this PetroKnowledge training course are:

  • To give an understanding of the principles of operation of a range of sensors and transducers
  • By using a hands-on approach, enable the delegate to investigate the operation of an instrumentation system through designing, building and testing typical sensor combined with appropriate signal conditioning circuits
  • To allow the delegate to become familiar and confident with a range of measurement techniques
  • To understand the concepts of Process Control and acquire the knowledge relating to the characteristics and properties of a process variable being measured
  • To become familiar and knowledgeable with PID control and develop the ability to ‘tune’ a process control system using PID control
  • To have the confidence and knowledge to apply the above techniques and principles to solve an unfamiliar and bespoke measurement situation in the workplace

Who is this Training Course for?

This PetroKnowledge training course is suitable for and is designed to attract and be of benefit to a range of people who work in the instrumentation and process plant area. Typically, but not exclusively this course will be of benefit to:

  • Electronic Engineers and Technicians
  • Chemical Engineers and Technicians
  • Electrical Engineers and Technicians
  • Electronic Design Engineers
  • Instrumentation Technicians
  • Electricians
  • Installation and Maintenance Technicians
  • Instrument and Process Control Technicians
  • Instrument Fitters
  • Maintenance Engineers
  • Mechanical Engineers and Technicians
  • Operations Engineers
  • Process Technicians
  • Production Professionals
  • System Integrators
  • Other professions (Engineers, Technicians) involved in the Process Industry who require an appreciation and understanding of the techniques used in Process Measurement and Control  

How will this Training Course be Presented?

This PetroKnowledge training course is delivered via a series of mixed activities which will at times involve delegate participation. Theoretical content is delivered by informal lecture and discussion and supplemented where appropriate with tutorial sessions using worked examples. An opportunity is given for delegates to perform their own calculations based on sample systems.

An important part of this PetroKnowledge training course is the hands-on aspect. Approximately a quarter of the total time will be devoted to practical activities. Delegates will acquire the skills to design their own instrumentation system from a given sensor(s) and specification and also, using relevant software, acquire the skills to ‘tune’ a process control system.

Organisational Impact

By attending this PetroKnowledge training course the delegate will return to their company more confident in the knowledge and use of sensors and instrumentation systems generally. More specifically, they will: 

  • Be equipped with new skills and knowledge which must impact positively within the company structure
  • Consequently, be able to leverage their skills to potentially cause an increase within the plant or process in term of overall productivity and efficiency through an appreciation of the operating principles of a range of sensors and transducers
  • Be better equipped to advise on new system installations in terms of sensor choice and specification and circuit design
  • Potentially through their newly acquired knowledge be able to advise on in-house use of suitable sensor technologies used in plant process and instrumentation systems thereby negating or at least reducing the dependency on external agencies and vendors
  • Therefore, potentially contribute towards and result in plant and process cost reductions leading to financial savings for the company

Personal Impact

The delegate will benefit personally from attendance of this course and will enhance their own knowledge base and level of confidence in the area of Sensor Technologies and Process Control Engineering. Specifically, the delegate will be able to: 

  • Understand the principle of operation of a range of sensors and transducers used in the measurement of flow, temperature, pressure, strain and level
  • Review the construction and operation of the most important sensors and transducers and their application in process measurement systems
  • Evaluate and select the most appropriate sensor technology for a given instrumentation system
  • Design, build and test using a given specification and sensor, their own instrumentation system within the course room
  • Identity components and features of a Process control system
  • Calibrate and signal condition the above system and take measurements from the system
  • Understand the limitations of Open loop systems and be aware of the inherent problems associated with Closed loop negative feedback systems
  • Optimise control by tuning a system using relevant software

Daily Agenda

Day One: Introduction to Sensors, Transducers and Instrumentation Systems
  • Introduction to Sensors, Transducers and Instrumentation Systems
  • Terms and definitions associated with Instrumentation systems, including;
    • Maximum error
    • Hysteresis
    • Repeatability
    • Sensitivity
    • Resolution
    • Span
    • Response time
  • Process Variables:
      • Mass flow
      • Volumetric flow rate
      • Pressure
      • Viscosity
      • Turbidity
Day Two: Introduction to Practical and Operator Considerations
  • Installation
    • Mechanical
    • Electrical
    • Communications
    • HMI
  • Maintenance
    • Mechanical
    • Electrical
    • Communications
    • HMI
  • Troubleshooting
    • Mechanical
    • Electrical
    • Communications
    • HMI
  • Strain, Pressure and Flow Measurement
    • Principle of Strain Measurement – tension, compression, stress, strain, Youngs modulus
    • Principle of operation, typical uses and installation considerations
    • Gauge types – principle of operation and configurations
    • Principles of Pressure measurement
    • Devices; principle of operation, typical uses and installation considerations of:
      • Diaphragms
      • Bellows
      • Capacitive devices
    • Principles of flow measurement
    • Reynolds number
    • Devices; principle of operation, typical uses and installation considerations of Invasive types:
      • Coriolis Flowmeter
      • Differential Pressure type flowmeters
        • Orifice plate
        • Venturi tube
    • Devices; principle of operation, application and installation considerations of Non invasive types:
    • Practical activity 1 – Installation, maintenance, and troubleshooting of a typical flowmeter
Day Three: Temperature, Level and Non-Invasive Ultrasonic Measurement Techniques
  • Temperature scales
  • Devices; principle of operation, typical uses and installation considerations of:
    • Resistance Temperature Detectors (RTD’s)
    • Thermistors
    • Thermocouples
  • Examples
  • Devices; principle of operation, typical uses and installation considerations of:
    • Ultrasonic techniques
    • Pressure techniques
  • Doppler shift and transit techniques
  • Ultrasonic flowmeters
  • Practical activity 2 – Installation, maintenance, and troubleshooting of a typical temperature sensor and transmitter
Day Four: Introduction to Process Control Engineering
  • Control Strategies
  • Block diagram representation
  • Control components
  • Servomechanisms and Regulators
  • Open and closed loop systems
  • Transfer Functions
  • Negative Feedback (NFB)
    • 1st and 2nd order systems
  • Examples – Transfer functions and Closed Loop systems
  • ON/OFF control
    • Two step control action
  • Proportional control
  • Proportional band vs. proportional gain
  • Proportional offset
  • Derivative action
  • PID control
  • Practical activity 3 – Detailed analysis of several control loops for a 3-phase separator.
Day Five: Tuning PID Controllers
  • Empirical methods of setting Controllers
    • Open loop reaction curve method (Ziegler-Nichols)
    • Default and typical settings
    • Closed loop continuous cycling method (Ziegler-Nichols)
  • Fine tuning
  • Practical activity 4 – Complete instrumentation and control systems for a 3-pahse separator

Certificate

  • On successful completion of this Training Course / Online Training Course, a PetroKnowledge Certificate / E-Certificate will be awarded to the delegates.

Other Training Courses You Might Be Interested In

Frequently Asked Questions

  • To register online through our website, please click “Enroll Now” on the course page, complete and submit the form. A confirmation e-mail and instructions will be sent to the participant’s e-mail.
  • You may also get in touch with our Registration Team on
    +971 50 981 7386 | +971 2 557 7389 or send an email to reg@petroknowledge.com

  • Payments can be made in USD or UAE local currency AED (Arab Emirates Dirhams) either by Bank Transfer or by Credit Card. Our Bank Account details will be provided on the invoice.
  • Course fees are payable upon booking unless a valid, authorized Purchase Order is provided and accepted.
  • Invoices will be sent via email/courier to the ID/name and address provided.
  • The course fee shall be settled prior to course start date. Corporate payments with existing payment policy shall be relayed to us in advance.

Upon successful registration online, enrolment on the respective training course will be confirmed by Registration Team by e-mail along with the invoice and joining instruction.

For corporate fees and group registration, please send your query to info@petroknowledge.com.

Follow Us:

Subscribe To Our Newsletter

    PetroKnowledge
    Chat with an assistant

    Mikee
    Hello there
    how can I assist you?
    1:40
    ×